Pet Dog Anti Bark Shock Collar Trainer Stop Barking Training Control Waterproof

Description

Specifications:1.Test product1A. Charge the bark stopper before use: You can charge the product with an output voltage of 5V through a PC, mobile power, USB or adapter for 2-3 hours.Power indicator description: When the bark stopper is low, the blue LED will flash quickly.-Blinking green, device is charging-Steady green, the device is fully charged-Steady red, indicating that the device is not charging properlynote: a. Improper charger means a charger with an output voltage exceeding 5V. b. The output voltage can usually be seen on the surface of the charger. c. If the device is charging, there will be no response when the button is pressed1B. Turn on the power of the bark stopper: Press and hold the button for 1 second to turn on the power. A...
Kinloon-IV
Your Best Online Business Partner
Pet Dog Anti Bark Shock Collar Trainer Stop Barking Training Control Waterproof
Specifications:
1.Test product
1A. Charge the bark stopper before use: You can charge the product with an output voltage of 5V through a PC, mobile power, USB or adapter for 2-3 hours.
Power indicator description: When the bark stopper is low, the blue LED will flash quickly.
-Blinking green, device is charging
-Steady green, the device is fully charged
-Steady red, indicating that the device is not charging properly
note:
a. Improper charger means a charger with an output voltage exceeding 5V.
b. The output voltage can usually be seen on the surface of the charger.
c. If the device is charging, there will be no response when the button is pressed
1B. Turn on the power of the bark stopper: Press and hold the button for 1 second to turn on the power. After the device is powered on, the indicator light will be steady red or green.
1C. Press the power button to enter test mode and the display will show the number 0. Then, blow or bark at the microphone sensor on the back of the product like a dog.
1D. The bark responder in test mode: When the device is set to "test mode", whether the mode indicator is red or green, when you blow or shout to the microphone sensor, it will vibrate, beep, and Gives more vibration. The display will automatically show the number 5 after the test is completed or if no test is performed within 10 seconds.
If the product responds as described above, you have successfully set up the bark stopper!
2. Put the product on your pet: Barkstop collar waterproof
2A. Connect the collar to the bark stopper.
Note: If you have a TPU collar in your package, mark the required length and leave a few extra inches (if your dog is young, it will grow more or wear a thick winter coat), then cut Drop the extra parts. Place the cut edge of the belt on the fire for a few seconds to seal the edge.
2B. Put the product around the dog's neck: Make sure it fits snugly against the product, but loosely enough so that one finger can be inserted into the leash and the pet's neck.
3. Mode setting: The following instructions will guide you through the process of switching modes.
-Press and hold the power button for 1 second to power on the device.
-After the device is powered on, the mode indicator will show green or red. Press the M button to switch the mode indicator.
-Green mode indicator indicates vibration mode; red mode indicator indicates strong vibration mode.
4. Sensitivity level: Level 1 ~ 5, level 5 is the most sensitive, level 1 is the least sensitive. Press the power button once to change the sensitivity level.
Product List:
Bark arrestor * 1
Collar * 1
Silicone conductive pillar * 2
USB cable * 1
User manual * 2
Item Specifics
Modified Item
No
Custom Bundle
No
Animal Type
Dog
Features
Rechargeable, Adjustable Shock Levels.
Fit
medium and small-sized dogs
Functional Modes
static/ shock，sound
Non-Domestic Product
No
UPC
Does not apply
Type
Collar
Color
Black
MPN
PET850
Control Method
Static/Shock
Brand
Unbranded
Payment
Returns
Kinloon-IV
Your Best Online Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Pet Dog Anti Bark Shock Collar Trainer Stop Barking Training Control Waterproof
Specifications:
1.Test product
1A. Charge the bark stopper before use: You can charge the product with an output voltage of 5V through a PC, mobile power, USB or adapter for 2-3 hours.
Power indicator description: When the bark stopper is low, the blue LED will flash quickly.
-Blinking green, device is charging
-Steady green, the device is fully charged
-Steady red, indicating that the device is not charging properly
note:
a. Improper charger means a charger with an output voltage exceeding 5V.
b. The output voltage can usually be seen on the surface of the charger.
c. If the device is charging, there will be no response when the button is pressed
1B. Turn on the power of the bark stopper: Press and hold the button for 1 second to turn on the power. After the device is powered on, the indicator light will be steady red or green.
1C. Press the power button to enter test mode and the display will show the number 0. Then, blow or bark at the microphone sensor on the back of the product like a dog.
1D. The bark responder in test mode: When the device is set to "test mode", whether the mode indicator is red or green, when you blow or shout to the microphone sensor, it will vibrate, beep, and Gives more vibration. The display will automatically show the number 5 after the test is completed or if no test is performed within 10 seconds.
If the product responds as described above, you have successfully set up the bark stopper!
2. Put the product on your pet: Barkstop collar waterproof
2A. Connect the collar to the bark stopper.
Note: If you have a TPU collar in your package, mark the required length and leave a few extra inches (if your dog is young, it will grow more or wear a thick winter coat), then cut Drop the extra parts. Place the cut edge of the belt on the fire for a few seconds to seal the edge.
2B. Put the product around the dog's neck: Make sure it fits snugly against the product, but loosely enough so that one finger can be inserted into the leash and the pet's neck.
3. Mode setting: The following instructions will guide you through the process of switching modes.
-Press and hold the power button for 1 second to power on the device.
-After the device is powered on, the mode indicator will show green or red. Press the M button to switch the mode indicator.
-Green mode indicator indicates vibration mode; red mode indicator indicates strong vibration mode.
4. Sensitivity level: Level 1 ~ 5, level 5 is the most sensitive, level 1 is the least sensitive. Press the power button once to change the sensitivity level.
Product List:
Bark arrestor * 1
Collar * 1
Silicone conductive pillar * 2
USB cable * 1
User manual * 2
Item Specifics
Modified Item :
No
Custom Bundle :
No
Animal Type :
Dog
Features :
Rechargeable, Adjustable Shock Levels.
Fit :
medium and small-sized dogs
Functional Modes :
static/ shock，sound
Non-Domestic Product :
No
Type :
Collar
Color :
Black
MPN :
PET850
Control Method :
Static/Shock
Brand :
Unbranded
Payment
Returns
All rights reserved.
Shop Category
Store Home
stage lighting
◈  moving lighting
◈  par can lighting
◈  controller
◈  smoke fog machine
◈  spider light
◈  Magic Ball Light
◈  wash wall light
◈  laser light
◈  pinspot light
home appliances
vehicle parts
Consumer Electronics
Pet supplies
Other
Hot Item
New List Item
2X 18W 6 LED Work Light Bar Flood Spot Lamp Offroad Driving Fog 4WD SUV Truck US
USD 7.99
42000mah 150Wh Generator Power Supply Energy Storage Station LED DC Quick Charge
USD 85.99
500W Wireless Fog Smoke Machine RGB Color LED Party Stage Light + Remote Control
USD 43.99
Brushless Solar Power Water Pump Panel Kit Fountain Pool Garden Watering 200L/H
USD 15.99
42000mah 150Wh Solar Generator Power Supply Energy Storage LED DC Quick Charge
USD 85.99
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
On Sep-18-21 at 00:58:08 PDT, seller added the following information: